How To Clean Prefinished Engineered Hardwood Floors

How to Clean Engineered Hardwood Floors

In terms of installation, versatility, durability, sustainability, and value, engineered hardwood floors accept some distinct advantages over their solid forest counterparts.

The best of both hardwood and laminate, engineered wood flooring consists of several hardwood or plywood layers, which make information technology more resistant to humidity and moisture, different a strip of solid wood, which can bend or bow. Solid wood planks can suffer from expansion and wrinkle in irresolute seasons, leaving unsightly gaps and cracks, equally well as "cupping" from moisture and shrinkage over a long period of time.

Engineered wood floor's ability to withstand humidity makes it a popular pick for kitchens and bathrooms, providing the high quality look and feel of solid hardwood without the worries of warping.

Clay and debris human activity as abrasives and can scratch finishes, leaving the flooring susceptible to damage. Sweep the floor regularly, and vacuum clean the engineered forest flooring carefully at least one time a week. Do not utilize a vacuum with a beater bar, as the bristles could vesture down the terminate of the flooring.

When your floor requires a bit more than attention than just regular maintenance, the best way to clean your engineered hardwood is with a damp mop and an advisable flooring cleaner. Avert using cleaning products that include vinegar, lather-based cleaners or wax on engineered hardwood flooring. These could erode or impairment the veneer surface on the upper layer of hardwood. Never make clean with steel wool, melamine sponges or a steam cleaner, as these could also get out behind irreversible wearable and tear.

While engineered floor tin can withstand humidity better than hardwood, excess water can still seep through cracks and joins causing warping and damage to the underlayment. Do not make clean with mops or towels that are completely drenched, and never leave a spill for also long every bit yous adventure damaging your floor.

Simple Green Multi-Surface Floor Intendance cleans all hard floor surfaces with a formula that won't leave backside dulling rest. The cleaner dries quickly, leaving behind a spot and streak-complimentary finish that allows the natural beauty of the flooring to polish through. Powerful, plant-based extracts, essential oils and minerals are used in place of petroleum distillates, ammonia, and chlorine usually constitute in other flooring cleaners.

Directions:

Articulate debris. Make clean and articulate the floor of all debris, dirt and dust using a vacuum cleaner, soft bristle broom, grit mop or microfiber mop.
Moisture your mop. Lightly moisture your mop pad or wipe with make clean water.
Use Elementary Light-green Multi-Surface Floor Intendance. Spray the cleaning solution as a light mist across your floor section by department.
Mop upwardly in sections. Follow the cleaner with a clean, lightly damp mop.
Air dry. Permit the floor to completely dry before allowing human foot traffic once more.

TIP: Refinishing engineered hardwood volition erase any dings and scratches. If the top habiliment layer is at to the lowest degree 3mm thick, you can sand it down and refinish it the same style yous would solid hardwood. If information technology is 2mm or less, scuff sand information technology with a buffer before applying a new finish.

Note: Although sponge mops tin be used in conjunction with this product, best results are achieved with a washable microfiber pad or a disposable mopping pad. On highly cogitating or glossy floors, damp mop with plain h2o equally a final rinse to restore greatest smooth. There are no polishes or waxes in this product.